In case of magnesium hydroxide leakage, how to deal with it

Magnesium hydroxide is a kind of chemical substance, because it is an alkaline substance, once the leakage of our human body will cause some harm, which requires us to do a good job in its leakage emergency measures, so as to ensure our life safety, so as to reduce the loss of it, so what are the measures of magnesium hydroxide leakage? 1, emergency personnel wear air-carrying breathing apparatus, wear anti-static clothing, wear rubber oil-resistant gloves, to avoid direct contact or across the leakage. 2, the use of its equipment should be grounded, as far as possible to cut off the source of leakage. 3. Containment of leaks, prevent leaks from entering sewers, surface water and groundwater, and avoid

Magnesium hydroxideIs a chemical substance, because it is an alkaline substance, once the leakage of our human body will cause some harm, which requires us to do a good job of its leakage emergency measures, so as to ensure the safety of our lives, so as to reduce its loss, so what are the measures of magnesium hydroxide leakage?
  13. Emergency treatment personnel shall wear air-carrying breathing apparatus, anti-static clothing and rubber and oil-resistant gloves to avoid direct contact with or crossing leakage.
  22. The equipment used shall be grounded and the leakage source shall be cut off as much as possible.
  33. Contain the leakage, prevent the leakage from entering the sewer, surface water and groundwater, and avoid environmental pollution.
  4If it is a small amount of leakage, as far as possible to collect the leakage liquid in a sealed container, with sand, activated carbon or other inert materials to absorb, and transfer to a safe place, prohibit flushing into the sewer.
  5If there is a large amount of leakage, we should build a dam or dig a pit to accommodate it, close the drainage pipeline, then cover it with foam to inhibit evaporation, and then transfer it to a tank car or a special collector with an explosion-proof pump, and recycle it or transport it to a waste treatment site for disposal.
  63. During operation, the warning area shall be designated according to the affected area of liquid flow, steam or dust diffusion, and the irrelevant personnel shall be evacuated to the safety area from the side wind and upwind direction.





Real-time information

Zhongke Flame Retardant Organization Watches 20 Closing Ceremonies

On the morning of October 22, 2022, members of Zhongke Flame Retardant New Materials Co., Ltd. watched the closing ceremony of the 20th Congress under the leadership of General Manager Wang Ligui.

What are the reasons for the failure of flame retardant after adding aluminum hydroxide flame retardant?

Everyone knows that there are two common flame retardants. Today we are going to talk about only one of them. Aluminum hydroxide flame retardant is an environmentally friendly halogen-free flame retardant, which can be widely used in fabrics, wood, plastics, and rubber., Polyurethane and other industries have ideal flame retardant effect. In the process of industrial application, it is found that flame retardant failure occurs when aluminum hydroxide flame retardant is added. The following are the reasons for the failure of aluminum hydroxide flame retardant, how to prevent it, how to deal with the operation, and restore the original function.

As a flame retardant, magnesium hydroxide also need to improve what aspects?

When it comes to flame retardants, everyone is familiar with them. Although we usually have less contact with them, we can know what they are used for from the name. Have to talk about magnesium hydroxide, we all know that its main presentation state is a granular, at present, the market sales of magnesium hydroxide particle size is larger, part of the commodity particle size up to tens of microns, immediately used as a flame retardant, poor dispersion, the physical properties of raw materials greater harm. In industrial production, physical grinding methods are generally used to reduce the particle size to 1 micron. The surface of magnesium hydroxide has high polarity and is easy to agglomerate. As the compatibility of refractory materials and polymer substrates, it not only reduces its flame retardant grade, but also causes more serious harm to the physical properties of raw materials.