Woodflame retardantIt is a new type of halogen-free environmentally friendly liquid flame retardant. This product has changed many shortcomings of the traditional flame retardant, which is easy to return to moisture and low flame retardant level. It is an environmentally friendly flame retardant with excellent performance in the world. Dedicated to wood (multilayer board, furniture, floor), insulation board and other industries.
Advantages:
1. Low smoke, smoke suppression; smoke toxicity than traditional flame retardants greatly reduced.
2. High efficiency: Due to its good permeability, it can achieve obvious flame retardant effect in a short time.
3. Halogen-free, non-toxic, in line with international environmental requirements.
4. Flame retardant grade: can reach B1 flame retardant grade, such as: wood oxygen index can reach 80%, so that the product from flammable to flammable or even non-flammable.
Method of use:
Can use immersion method, spray method, brushing, pumping pressure.
First put the flame retardant into the water tank, dilute with water according to the ratio of 1:3, then soak the wood or veneer into the water tank, and determine the soaking time according to the water absorption rate of the xylem of the wood. For some wood that is relatively dense and not easy to absorb water, pressurized auxiliary equipment can be considered, and the soaked wood can be dried or dried in the sun.

Suggested Dosage: Can be diluted with one to three times water.
Vacuum pumping pressure: 300kg/m3
Brushing/spraying: 0.2-0.3kg/m2?
Drying: 40 ℃ × 2 hours, or less than 80 ℃ drying, or natural drying