How does fire retardant play a role in family fire prevention?

Due to the flammability of decoration materials in the market, there is a general lack of necessary standards, so owners should pay special attention to the purchase of decoration materials and try to choose inorganic decorative materials, while home decoration is the secondary processing of the inner surface of the wall.

Due to the flammability of decoration materials in the market, there is generally a lack of necessary standards, so owners should pay special attention to the purchase of decoration materials and try to choose inorganic decorative materials. Home decoration is the secondary processing of the inner surface of the wall, and ceiling materials are also easy to ignore their fire hazards. If the materials used are not flame retardant, once a fire occurs, the home decoration materials will be ignited first, so, home decoration fire prevention is very important. Belowflame retardantManufacturers to talk about the role of fire retardant in the family fire.
1. construction procedures to be standardized
In the decoration, if the water and electricity installation project of the house is good and the gas pipeline is good, try not to change it without authorization for convenience and beauty. If changes need to be made, or if there is no original installation, be sure to hire qualified personnel for construction. When carrying out construction near the gas pipeline or water and electricity pipeline, special care should be taken not to damage the pipeline and valve switches to avoid fire or explosion caused by gas leakage or short circuit of the wire. In the choice of wire, must choose good quality flame retardant insulated copper core wire; in the ceiling or interlayer laying electrical lines, must be set through the insulation metal pipe or set through the oxygen index of not less than 35 flame retardant hard plastic, and can not have joints. In addition, but also pay attention to the installation location of home appliances, high-power appliances use sockets and lighting fixtures of high-temperature parts, should be away from combustible materials, or take heat insulation, heat dissipation and other protective measures to prevent accidents.
2. material safety is a prerequisite
Although the price of some decoration materials is low and the quality is acceptable, they do not meet the fire protection requirements and will produce a lot of smoke or toxic gases during the combustion process. In the construction should avoid the use of such combustible, flammable materials.
The fire protection parts that should be considered in decoration are mainly ceiling, wall surface, ground, fixed furniture, etc. Many owners in the installation of the ceiling, will choose the wooden keel bracket, in order to protect the home safety, must choose the flame retardant treated with flame retardant wood keel bracket, so as to become the fire performance of the ceiling.
The kitchen cabinet is close to the open fire. Cabinet countertops are recommended to choose artificial stone or natural stone countertops. Other materials of the cabinet are good choice of fireproof board. Wallpaper, paint, floor these three types of materials are also very easy to cause the source of fire, therefore, these three types of materials are required to have a certain fire retardant performance. Some soft decorations in the home, such as curtains, sofa surfaces, carpets, etc., can also be considered to choose flame-retardant fabrics treated with textile flame retardants. For some flammable decorations, they can be soaked or sprayed in the fabric flame retardant. Do fire prevention treatment, so that they become not easy to burn. Try to avoid the choice of flammable materials for decoration.
3. Set up Fire Prevention Consciousness
The general owners of fire safety awareness is relatively weak. They in the decoration design, did not take into account the complex decoration may become a fire hazard. When choosing decoration materials, it is often considered from the price and quality of the materials, without considering the fire rating of the materials. Different materials have different fire rating, divided into non-flammable, flammable, flammable, flammable. Home decoration should consider the main fire parts are ceiling, wall, ground, fixed furniture, etc.
To eliminate the hidden danger of indoor fire, first of all, you should improve the awareness of fire prevention, do not take it lightly, and implement the fire safety requirements into every detail of home decoration, so as to prevent danger and reduce unnecessary losses.

Real-time information

Zhongke Flame Retardant Organization Watches 20 Closing Ceremonies

On the morning of October 22, 2022, members of Zhongke Flame Retardant New Materials Co., Ltd. watched the closing ceremony of the 20th Congress under the leadership of General Manager Wang Ligui.

What are the reasons for the failure of flame retardant after adding aluminum hydroxide flame retardant?

Everyone knows that there are two common flame retardants. Today we are going to talk about only one of them. Aluminum hydroxide flame retardant is an environmentally friendly halogen-free flame retardant, which can be widely used in fabrics, wood, plastics, and rubber., Polyurethane and other industries have ideal flame retardant effect. In the process of industrial application, it is found that flame retardant failure occurs when aluminum hydroxide flame retardant is added. The following are the reasons for the failure of aluminum hydroxide flame retardant, how to prevent it, how to deal with the operation, and restore the original function.

As a flame retardant, magnesium hydroxide also need to improve what aspects?

When it comes to flame retardants, everyone is familiar with them. Although we usually have less contact with them, we can know what they are used for from the name. Have to talk about magnesium hydroxide, we all know that its main presentation state is a granular, at present, the market sales of magnesium hydroxide particle size is larger, part of the commodity particle size up to tens of microns, immediately used as a flame retardant, poor dispersion, the physical properties of raw materials greater harm. In industrial production, physical grinding methods are generally used to reduce the particle size to 1 micron. The surface of magnesium hydroxide has high polarity and is easy to agglomerate. As the compatibility of refractory materials and polymer substrates, it not only reduces its flame retardant grade, but also causes more serious harm to the physical properties of raw materials.